Condenser Manufacturer Manufacturer Introduction Composition

Purple Star - this article is new and awaiting 10 votes!


The air-conditioning refrigeration system consists of a compressor, a condenser manufactured by a Condenser Manufacturer, an expansion valve, and an evaporator. Its working process is as follows: the refrigerant boils at the pressure-temperature, which is lower than the temperature of the object or fluid to be cooled. The compressor continuously sucks the vapor generated in the evaporator and compresses it to the condensing pressure, and then sends it to the condenser, where it is cooled and condensed into liquid under pressure under equal pressure, and the heat is released when the refrigerant is cooled and condensed is transferred to the cooling The condensing temperature corresponding to the condensing pressure of the medium must be higher than the temperature of the cooling medium. The condensed liquid enters the evaporator through the expansion valve or other throttling elements. During the whole cycle, the compressor plays a role in compressing and transporting refrigerant vapor and causing low pressure in the evaporator and high pressure in the condenser. It is the heart of the entire system. The throttle valve throttles the refrigerant flow. The pressure acts on and regulates the flow of refrigerant into the evaporator. The evaporator is a device that outputs cold energy. The refrigerant absorbs the heat of the object to be cooled in the evaporator to achieve the purpose of producing cold energy. The condenser is a device that outputs heat. The heat absorbed from the evaporator is consumed by the compressor. The heat of the work conversion is taken away by the cooling medium in the condenser. You can also Custom Condenser Coils.


If you want to suggest Author to edit any line in this Starticle then click on that line for your suggestion.

Selected Line :
Suggestions :
Reset Password